Preferred polyethylene PTFE sheet PTFE gasket PTFE rod Langfang Insein sealed Co., Ltd. Contact; Diaojing Li Tel; 15,003,162,969 QQ number 759219975 Teflon rods, there are three. Diameter 4mm-9mm the stick selects dispersion polymerization Teflon resin made from by Paste push processing: diameter 10mm-50mm the stick selects suspended PTFE resin extrusion processing made; diameter 55mm-300mm rods by molding. Known plastic PTFE has excellent chemical resistance and dielectric properties, non-aging, non-stick, in the case of no-load temperature of -180 ℃ ~ 260 ℃, known solid material it has the lowest friction coefficient 2, use: electric insulation parts, gaskets, anti-sticking material 3, Specifications: Model Diameter (mm) Length (mm) push rod 4 to 9 according to the user needs to produce extruded rod 10 to use temperature of 1,001,000 molded rods 55 to 300 100 to 300 contemplation density g/cm3 2.15 ~ 2.30 Tensile strength Mpa 20 35 Elongation at break% 300 to 450 ℃ -180 ℃ ~ 250 ℃ TFE products include PTFE sheet, tube , rod, film and gaskets etc., from 100% pure PTFE raw material by molding or turning process is refined. In known plastic, PTFE has the best corrosion resistance, non-aging, low coefficient of friction, abrasion. Can be safely used in a temperature range of -180 ~ 260C. Performance features: pure PTFE sheet PTFE products include PTFE sheet, tube, rod, film and gasket from 100% pure PTFE raw material by molding or turning process is refined. In known plastic, PTFE has the best corrosion resistance, non-aging, low coefficient of friction, abrasion. Can be safely used in a temperature range of -180 ~ 2600C. Improved PTFE improved PTFE original PTFE powder evenly joined in materials such as glass, carbon, graphite, copper, and then by molded. Compared with pure tetrafluoroethane product, it has a better compressive strength, resistance to wear, good thermal conductivity, low thermal expansion and other properties. Tensile strength the withstand voltage Mpa density g/cm3 temperature ° C pure PTFE board of 15Mpa, 1.6 2.1 2.3 -196 to 260 Modified PTFE plate 10Mpa 4.0 2.1 - 2.3 -196 to 260 expansion PTFE plate Gore, Klinger, Garlock Sealon, etc., according to the manufacturer's indicators sealing material, the electrically insulating member, the bush, lubricated guides etc.. PTFE turning plate PTFE cutting boards suspended PTFE resin the autoclave pressure Chengdu University sets of barrels (≤ 2100mm), sintered at high precision peeling machine peeling processed into less than 6mm cutting boards . Polytetrafluoroethylene article is made of polytetrafluoroethylene powder, mold Crimp after sintering, has excellent corrosion resistance, good self-lubricating and non-blocking properties. Therefore, the products are resistant to almost all chemicals, and in many other areas of wear, pressure, friction coefficient. Are available for the user: bar stock, tubing, sheet metal, flat gaskets, V-pads, valve seats, valve head, piston rings, PTFE-coated pad and all kinds of PTFE filled products Product Name: PTFE The vinyl sheet Product Description: 1, features: made of PTFE plate suspended PTFE resin molding. Known plastic, it has the best resistance to chemical corrosion, not aging, known solid material, it has the best friction coefficient, the case of no-load temperature of -180 ℃ ~ 260 ℃. 2 Use: anti-corrosion lining material and sealing liner, bearing slide rails, electrical insulation parts. Specifications: length (mm) × width (mm) Thickness (mm) nominal tolerances 150 × 150 1.0 ~ 100 ± 0.30 ~ ± 0.50 250 × 250 1.5 ~ 100 ± 0.30 ~ ± 0.50